TwinTurbo.NET: Nissan 300ZX forum - You will need the valve to pass a visual inspection.
People Seeking Info
 
   


     
Subject You will need the valve to pass a visual inspection.
     
Posted by de944 on July 15, 2008 at 4:16 PM
  This message has been viewed 429 times.
     
In Reply To A few notes. posted by MixManMash on July 15, 2008 at 04:03 PM
     
Message Luckily the pipes are very well buried. So leave the valve, cut/remove the pipes. I used the 300degree egr elimination kit. It leeks very clean. I used a dremel cut off wheel and cut the pipes at the back of the block. I left the valve for the visual insspection and have had no problems. Hope this helps.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.