| as I never upgraded to the snow kit ..this is what I did. I am not sure which pin is which ...so from an orientation perspective ..the prong / pin on the driver side ( N/S orientation ) is pin 1 ..middle pin is pin2 and passenger pin is pin 3 pin 1- constant 12 v source
pin 2- ground
pin 3 - power wire for device when rocker switch is on - light illuminates and water injection system is armed when rocker switch is off - nothing works as designed my water injection power runs off the battery - so I might find a 12v source that is active when the car is off ... the issue was easy to determine once I made a phone call to Thundar Z and he suggested I start with a test light. That's when I realized that the remote 12 v source I was using for pin 1 was not active without the ignition on ( I was using a 12v wire for my widebands - duhh - should have realized that if the widebands are not on - the 12v source is not active ) thanks
=============Sig begins here================ The Devils Z.com 
The Devils Z Pic
666 rwhp dyno The Demon Z pic (in progress)
View Me! Disclaimer : Not Safe For Work !
|
