Subject	I regret buying deatschwerks
Posted by	ali300zx on May 30, 2008 at 10:24 AM
	This message has been viewed 311 times.
In Reply To	There is no such thing as a 90-94 Deatschwerks injector posted by Cade(PA) on May 30, 2008 at 07:57 AM
Message	already had 2 fail within 800 miles (3 months) who cares if Nismo doesn't offer a warranty; they don't need one, unlike deatschwerks. referring to 95+ style.
Follow Ups	Did any1 install Deatschwerks injectors with their 95- kit ? - Dark Diver 04:17:35 05/30/08 Grinding the 90-94 plenum for #1 when using '95 - ThunderZ 06:23:07 05/30/08 You have to grind #1 for clearance ANY time you convert - Bernie (NoVA) 07:20:14 05/30/08 thus ... - Guapo 08:36:05 05/30/08 Poop, I forgot about that - BigTDogg (MA) 13:33:07 05/30/08 I hear the 90-94 style Deatschwerks injectors are still - Jason300zxTT 07:48:13 05/30/08 There is no such thing as a 90-94 Deatschwerks injector - Cade(PA) 07:57:00 05/30/08 hmm.. must of read the post wrong. - Jason300zxTT 08:56:10 05/30/08 I think I have a bad one already w/no road time on it.... - Marc (NJ) 09:34:07 05/30/08 Check your wire splice. (n/m) - Bernie (NoVA) 09:49:58 05/30/08 Wire splice is fine, could the injector be stuck? or clogged (n/m) - Marc (NJ) 10:11:25 05/30/08 Maybe but unlikely - how does the spark plug/coilpack or - Bernie (NoVA) 10:34:48 05/30/08 Swapped coil pack, no change, swapped plug with #1 - Marc (NJ) 15:10:02 05/30/08 Did you check for spark? If the plug was wet, the - ThunderZ 21:10:22 05/30/08 It could be the connector. Check your wiring. If freshly - Yoshi 13:29:22 05/30/08 it's a kick ass service/product they offer (n/m) - LJZTT 09:34:33 05/30/08 I regret buying deatschwerks - ali300zx 10:24:00 05/30/08 Well buying "resized" stock injectors isn't be best idea - Bernie (NoVA) 10:36:22 05/30/08 Did Deats replace them? (n/m) - Yoshi 13:30:09 05/30/08 Re: Did Deats replace them? - ali300zx 15:38:02 05/30/08 I know what you mean...I switched to Deats a while - Yoshi 16:22:40 05/30/08 I hope you guys are ALSO doing the 12v injector rewire - Bernie (NoVA) 16:55:23 05/30/08 FYI -- I've had 5 old style (new) ones installed for 1 year - jzack 17:29:18 05/30/08 yes 740's and i just used a dremel and grinded out the area - pearlyellowtt 08:03:26 05/30/08 OK, thanks guys, that's what we did. - Dark Diver 16:28:34 05/30/08 They rebore stock injectors to get the higher flow rates. - Bernie (NoVA) 16:57:27 05/30/08 Re: They rebore stock injectors to get the higher flow rates. - ouikikazz 18:00:06 05/30/08 Make your own conclusions... - Bernie (NoVA) 19:42:30 05/30/08 Re: Make your own conclusions... - ouikikazz 02:17:22 05/31/08
Post a Followup	You cannot reply to this message because you are not logged in.