Subject	FYI: Dead, intermittent gauge cluster fix>>>>>
Posted by	zboost(NoVA) on May 24, 2008 at 8:55 PM
	This message has been viewed 220 times.
Message	I've been trying to diagnose an intermittent/dead gauge cluster and I found the culprit. The "meter" fuse in the fuse panel was loose! wrapped in some aluminum foil to make it tight and my gauge cluster works :) i've alot of issue like this in search and can only imagine how many people are driving around with dead clusters/spending money on sensors. key words: dead gauge cluster gauges meter intermitent intermittent intermiternt sporadic once in a while meters fuel temp tach boost pressure oil connectors connector BEST 1/4mile 11.92 @ 117mph. PUMP gas, true 11 sec. street car :) (VGTT set-up) stock turbos/injectors "yo yo. writing this one in jail - tight300zx" I hope you got soap on a rope?? (n/m) - Spongerider :) 19:14:08 04/01/04 we'll know if the screen name changes ;) (n/m) - SactoTodd 19:32:36 04/01/04 "I did plug the holes, But I did it by taping over them a lot, I didnt think that maybe HOT air is comming through there, And it melted the tape, damnit im an ass." - - DC 21:11:01 02/18/04 (the "holes" were located on the exhaust)
Follow Ups	FYI: Dead, intermittent gauge cluster fix>>>>> - zboost(NoVA) 20:55:02 05/24/08 Even better fix..then wrapping aluminum foil...is - twinturbineZ 21:43:37 05/24/08 i doubt a lot of others have that same "loose" fuse - Halo Z 21:45:14 05/24/08 better than bending fuse or alum foil, take - RT1 15:18:21 05/25/08 Having had to do this - trying to bend the prongs back - Bernie (NoVA) 16:58:16 05/25/08 tried to do it, deemed it impossible, went with foil. (n/m) - zboost(NoVA) 17:34:46 05/25/08
Post a Followup	You cannot reply to this message because you are not logged in.