| Message |
:Thanks much for the pics! :You said that the harness should not attach to the roll bar or seach anchors, so where are the various straps attached? : you owe me. i didnt want anyone to see this. it's a secret.- yellow is the roll bar (three bolts at each 'point' of the roll bar), backed by a single 1/8" thick steel backing plate. - red is the harnesses, backed by individual 1/8" thick steel backing plates. everything is kept isolated, otherwise, if the seat were to fail in a crash, there goes your harness. or if your rollbar where to shear away from the unibody, you'd loose that link of your harness. ps, mine are bolted directly to the Z. no eyebolt thingys.

Petz #3
|
 |