TwinTurbo.NET: Nissan 300ZX forum - Confirmed! (btw I changed my sn, got flamed on the other)
People Seeking Info
 
   


     
Subject Confirmed! (btw I changed my sn, got flamed on the other)
     
Posted by Z32Peter on November 10, 2003 at 10:55 PM
  This message has been viewed 355 times.
     
In Reply To hmmm thanks peter, can anyone confirm yellow wire? (n/m) posted by Red ZX (SoCal) on November 10, 2003 at 07:15 PM
     
Message but here's the wire locations for my car (90 300z), hopefully it will turn out alright in the post

| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|black/yellow |+ |ignition harness |
| SECOND STARTER|black/yellow |+ |ignition harness |
| IGNITION|black/red |+ |ignition harness |
| ACCESSORY|blue |+ |ignition harness |
| POWER LOCK|add actuator | |in drivers door |
| POWER UNLOCK|add actuator | |in drivers door |
| PARKING LIGHTS +|green/red | |at light switch |
| HEADLIGHTS|pink, pink/black |- |at light switch *3 |
| DOOR TRIGGER|blue |- |anti-theft module *2 |
| TRUNK/HATCH PIN|common with doors | | |
| HOOD PIN|orange/blue |- |anti-theft module *2 |
| FCTRY ALARM ARM|blue/red |- |dr.kick panel or alarm |
|FCTRY ALRM DISARM|gray/red |- |dr.kick panel or alarm |
| TACHOMETER|yellow/red | |test conn L fender *1 or ECU |
| BRAKE WIRE|red/black |+ |brake pedal switch |
| HORN TRIGGER|green/white |- |steering column |
| WIPERS|orange/ sil dts |- |at switch |
| LF WINDOW UP/DN|blu/wht - green |A |in drivers door |
| RF WINDOW UP/DN|wht/blk - blk/yel |A |in drivers door or dkp |
| RADIO 12V|yellow |+ |radio |
| RADIO GROUND|black |- |radio |
| RADIO SWITCH|blue |+ |radio |
| RADIO ILLUMINATE|red/blue |+ |radio |
| POWER ANTENNA|black/red |+ |radio |
| LF SPEAKER|blue - blk/wht | |radio |
| RF SPEAKER|brown - blk/red | |radio |
| LR SPEAKER|lt. green - blk/yel | |radio |
| RR SPEAKER|orange - blk/pnk | |radio |


Notes:
*1 Tach test connector located between fuse/relay panel and inner fender behind left headlight. One wire in round connector. *2 Anti-theft module is located under carpet on passenger floor board. Also red/white at interior light. *3 May need to isolate purple wire from light switch with relay to prevent high beam wigwag. be sure to leave parking lights on when testing.

On the door triggers, you can just hook up the wires to the floor lights. They are turned on when doors are open, so it will trigger the alarm.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.