| Message |
well I told you guys I might do a write up on alarm install. Well I got carried away with it and forgot to take pics half way through. But I got the alarm on there, still have to finish it up (I ran out of electrical tape) but it's on there and remote start is working (on a manual) :). My main problem is going to be installing an actuator in the driver side door for keyless entry. Sorry about the write up. If any of you guys have a question about installation process or anything like that, feel free to contact me, I will be more than happy to answer questions. By the way, for all of you guys who are thinking about doing this yourself, it's not that hard, just time consuming. If you have basic knowledge on working with cars and wires and soldering then you should be alright. The manual on the alarm guides you through the whole process. I think the hardest part would be finding the wires , and then hiding all the alarm components. Well and of course the actuator install, but other than that it's a DIY job.
|
 |
