Subject	WANTED: i need 90TT parts!!!!!!!!!
Posted by	jaybrown300 on October 12, 2005 at 2:25 PM
	This message has been viewed 128 times.
	Screen Name: jaybrown300 Real Name: Brown Phone: 321-123-4321 Location: atlanta, ga 30308 USA E-mail: jaybrown300@yahoo.com Research jaybrown300's post history
Message	I have money in paypal ready for these items, if you have them and are ready to sell and ship please e-mail me so we can get things rolling!!!! Parts needed... short description.... -drivers side A pillar in black -passenger side window switch in black -drivers side headlight rubber -blower amplifier(mounter near the ac blower, looks like a small relay but with 3 wires, one black and 2 blue i think) -ac outside temp sensor Long description.... a-pillar- if sitting in the car on the drivers side, this is the trim piece to your left that is between the door glass and windshield. it runs from the top of the dash up to where the t-top slides in place. people usually mount gauges here and call them a-pillar pods.... passernger window switch- umm, when sitting on the passenger side the switch that you press to make the window go up and down.... exterior temp sensor- mounted in the front of the car, on the underside of the front bumer support(the big alum bar that the foglights are mounted in). this is a small black box(a little bigger than 5 quarters stacked together) that has a wire running out of it. the plug for this little guy is mounted on the support for the ac drier(black or silver can about the size of a coke can mounted on the passenger side inside the opening of the factory bumper). there are only 2 wires in the plug for the temp sensor, i think one is red and the other is yellow or green... headlight rubber drivers side- this is the rubber piece that surrounds the headlight. it is between the headlight glass and the front bumper, hood, fender, and nose panel. to remove it simply pop the hood and pull it gently at the corner nearest the nose panel/hood latch, once you have that corner free it should pull right out the whole way around. it may require a little tugging but not so much that it tears... blower amplifier- (i don't know what color it is but it looks alot like a relay that can be found in the engine bay fuse box.) this is mounted behind the glove box(on the blower itself i think). it has a plug with three thick wires going to it, (one black and 2 blue i believe). on the very bottom of the ac blower there is a plug with 2 wires, one black an one blue, follow this harness up under the dash, it should run into the blower amplifier before it joins back into the main harness...
Follow Ups	i need 90TT parts!!!!!!!!! - jaybrown300 14:25:21 10/12/05