Subject	SELLING: IPP Engine packages at GREAT Prices
Posted by	Kyle(Houston) on September 23, 2014 at 4:39 PM
	This message has been viewed 880 times.
	Screen Name: Kyle(Houston) Real Name: Kyle Puckett Phone: 281-288-0700 Location: Spring, TX 77388 USA E-mail: kyle@importpartspro.com Research Kyle(Houston)'s post history
Message	For those of you who do not know me I have been racing and building Nissan's and Infiniti's for over 16+ years now. I owned and built one of the fastest Nissan 300zx street cars in 1999 that held the 1/4 record until just a few years ago. The machine shop that does the machining of the engines has done some of the highest HP VG30DETT and VQ35 motors in the nation. That being said I have several engine packages that are sure to fit your budget and goals. Here is what I have to offer(parts in italics are upgraded from previous stage): Short Block Packages Stage 1 Short Block Package: Wiseco Pistons Shotpeened Stock Rods ARP Rod Studs Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled This package runs only $2500. To purchase this package, or to get more details click Here Stage 2 Short Block Package: Wiseco Pistons Eagle Rods ARP Rod Studs Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled This package runs only $3050. To purchase this package, or to get more details click Here Stage 3 Short Block Package: CP Pistons Pauter Rods ARP Rod Studs ARP Main Studs Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled This package runs only $3850. To purchase this package, or to get more details click Here Custom Head Packages Stage 1 Head Package: Heads inspected and cleaned Heads Pressure Tested Heads redecked Cleaned exhaust and intake runners Valves checked and replaced as needed Valve guides checked and replaced as needed 3 angle valve job Valve heights set Heads prepped and assembled New OEM Valve stem seals This package runs only $1000. To purchase this package, or to get more details click Here Stage 2 Head Package: JWT New Billet(not reground cams)Cams(Your Choice) JWT HD Valve Springs Heads inspected and cleaned Heads Pressure Tested Heads redecked Ported exhaust and intake runners Valves checked and replaced as needed Valve guides checked and replaced as needed 5 angle radius cut valve job Valve heights set Heads prepped and assembled New OEM Valve stem seals This package runs only $3050. To purchase this package, or to get more details click Here Stage 3 Head Package: JWT New Billet(not reground cams)Cams(Your Choice) JWT HD Valve Springs Ferrea 1mm Oversized Valves 1mm Oversize Valve seats Heads inspected and cleaned Heads Pressure Tested Heads redecked Ported exhaust and intake runners Valves checked and replaced as needed Valve guides checked and replaced as needed 5 angle radius cut valve job Valve heights set Heads prepped and assembled New OEM Valve stem seals This package runs only $3950. To purchase this package, or to get more details click Here Stage 4 Head Package: JWT or Tomei Cams(Your Choice) JWT or Tomei HD Valve Springs Tomei Solid Lifters Titanium Retainers Ferrea 1mm Oversized Valves 1mm Oversize Valve seats Heads inspected and cleaned Valves checked and replaced as needed Valve guides checked and replaced as needed Heads Pressure Tested Heads redecked Ported exhaust and intake runners 5 angle valve job Combustion Chamber work Valve heights set Heads prepped and assembled New OEM Valve stem seals This package runs only $5850. To purchase this package, or to get more details click Here Long Block Packages Stage 1 Long Block Package: Wiseco Pistons Shotpeened Stock Rods ARP Rod Studs Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled Heads inspected and cleaned Heads Pressure Tested Heads redecked Cleaned exhaust and intake runners Valves checked and replaced as needed Valve guides checked and replaced as needed 3 angle valve job Valve heights set Heads prepped and assembled New OEM Valve stem seals New OEM Cam Seals New OEM Head Gaskets New OEM Oil Pump New OEM Oil Pump Gasket Engine will come with Heads bolted to block and torqued to spec This package runs only $3675. To purchase this package, or to get more details click Here Stage 2 Long Block Package: Wiseco Pistons Shotpeened Stock Rods ARP Rod Studs Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled Heads inspected and cleaned Heads Pressure Tested Heads redecked Valves checked and replaced as needed Valve guides checked and replaced as needed Ported exhaust and intake runners 5 angle radius cut valve job Valve heights set New OEM Valve stem seals Heads prepped and assembled New OEM Cam Seals New OEM Head Gaskets New OEM Oil Pump New OEM Oil Pump Gasket Engine will come with Heads bolted to block and torqued to spec This package runs only $4225. To purchase this package, or to get more details click Here Stage 3 Long Block Package: Wiseco Pistons Eagle Rods ARP Rod Bolts Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders New Brass Freeze Plugs installed All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled Heads inspected and cleaned Heads Pressure Tested Heads redecked Valves checked and replaced as needed Valve guides checked and replaced as needed Ported exhaust and intake runners 5 angle radius cut valve job Valve heights set New OEM Valve stem seals Heads prepped and assembled New OEM Cam Seals New OEM Head Gaskets New OEM Oil Pump New OEM Oil Pump Gasket Engine will come with Heads bolted to block and torqued to spec This package runs only $4800. To purchase this package, or to get more details click Here Stage 4 Long Block Package: Wiseco Pistons Eagle Rods ARP Rod Bolts Block Inspected and acid dipped Block redecked Block water passage bored out for more water to back cylinders All oil galleys cleaned and new oil plugs installed Block Bored and Honed using a Torque Plate Block Bored and Honed using a Torque Plate Crank center weight tig welded into place Crank balanced New Moly Coated Race Spec Main bearings installed New Moly Coated Race Spec Rod bearings installed Block prepped and assembled JWT Cams(Your Choice) JWT HD Valve Springs JWT Cam Sprocket Adaptors Heads inspected and cleaned Heads Pressure Tested Heads redecked Valves checked and replaced as needed Valve guides checked and replaced as needed Ported exhaust and intake runners 5 angle radius cut valve job Valve heights set New OEM Valve stem seals Heads prepped and assembled New OEM Cam Seals New OEM Head Gaskets New OEM Oil Pump New OEM Oil Pump Gasket Engine will come with Heads bolted to block and torqued to spec This package runs only $6150. To purchase this package, or to get more details click Here More Long Block Packages are available by clicking Here Of course these are just the packages I have put together. Any package can be added to, subtracted from, or customized to meet your goals and contain the parts your heart desires. Also, full assembly and disassembly of the timing components can be done for added cost. Contact me for details. Feel free to call me, email me, or IM me at anytime to discuss your goals and needs.
Follow Ups	IPP Engine packages at GREAT Prices - Kyle(Houston) 16:39:45 09/23/14