Hey guys and gals!! If you want to bring us just the VG30DE or /TT engine already out of the car, we can and will rebuild the entire engine from the ground up if you want. The engine will have all brand new parts OEM from Nissan. If you wish to bring the Z here at our facility in either NC or FL, and we have to pull the engine then it is an additional labor of 2,500.00 to do so.
To uninstall then reinstall and to do a basic tune on the engine once it is installed.ALL REBUILDS MUST USE A BRAND NEW WIRING HARNESS!!!!! It is not up for discussion. We will not do a job without a brand new wiring harness, if the Z's engine is installed by us. Here is a list of what you will get with the new rebuilt STOCK engine: 1. Full OEM Nissan gasket kit including head gaskets 2. New Nissan freeze plugs plus painted block 1200degrees 3. New Clevite rings, bearings, main, and rods 4. New Nissan OEM Oil and Water Pumps 5. New Nismo Thermostat with radiator by pass hoses 6. New Nissan knock sensor and sub harness 7. New Nissan 24 OEM lifters 8. Timing belt with pulleys and auto tension-er and studs 9. Machine shop cost (heads and block)Acid dipped honed 10. 3 angle valve job for better air flow, valve seals replaced and cleaned 11. Labor included 12. Powder coat the engine to whatever color scheme you would like. Choose 3 colors.....Chrome is extra NOW THIS DOES NOT I REPEAT DOES NOT INCLUDE TURBOS OR ANY SENSORS INCLUDING INJECTORS. We reuse all sensors and replace the ones that need it during the rebuild process If you send us just the engine, the price for just the stock rebuild is: $5,200.00 for an NA ……..$5,700.00 for a TT or if you bring us the Z and we have to do additional labor to pull the engine and install it back in the Z and basic tuning it will be this price: $5,700.00 + $2,500.00 = $8,200.00 + $400.00 wiring harness = $8,600.00 GRAND TOTAL. If you want a stock engine that is totally built from top to bottom including the sensors, hoses, harnesses, powder coated, and turbos you are looking in the neighborhood of $12,000.00 to $15,000.00 installed with a basic tune! Here is some of our examples of our work over the years. 
As you can see here all of the parts I mentioned above installed on this rebuilt motor as well. Well there are some of our work examples. Please call me today to find out what we can do for you. 8 to 9k is for a stock motor. Anything you want installed at the time of the engine rebuild all you would need to do is buy the parts no additional labor required, except for inter-coolers, pop chargers, BOVs, or anything else requiring taking apart the front end. My number is 919-622-1901 and my name is Daniel Nicolosi. My you tube channel is http://www.youtube.com/user/The300ZXGuru?feature=mhee ]
My Facebook page is http://www.facebook.com/ZShopPremier My e-mail is dan@premierz.com
If you need any help on your Z please give me a call as well.
|
Premier Z shop rebuilt VG30DE engines! - 
