Included AccessoriesZ1 Motorsports Custom Z32 Auxillary Harness - This plug in harness has specific connections for direct Plug and Play operation with the included sensors.
External GM MAP Sensor- We highly recommend using an external GM MAP sensor for the most accuracy and optimum performance. The bar ratings for the sensor have to be compensated for vacuum. Keep in mind the on-board map sensor is only operable to 22 Psi.
Intake Air Temperature Sensor- This sensor must be used if tuning using Volumetric Efficiency a.k.a. Speed Density. in conjunction with the MAP Sensor.
Dual Channel Wideband Controller- This unit is essential for tuning and enhanced safe operation of your Z. With built-in free air calibration feature ensures the utmost accurate readings.
Optional Accessories
Boost Controller Solenoid- The Haltech ECU allows for the connection of a boost controller which is also controlled by the ECU. (Includes fittings and rubber insulate mount) Please choose the appropriate option below.
When the Haltech EMS is properly tuned you will make more power & do it safer than on the stock ECU with a chip or Nistune. There are no limits on the range of additional functionality. The Haltech can serve as your boost controller, turbo timer, can control water/methanol injection and nitrous systems, just to name a few. The Haltechs ability to take feedback from sensors monitoring all the vitals and protect your engine at the first signs of any problems is invaluable and cannot be matched with the stock Z32 ECU. The Haltech monitors, adjusts to, and protects against knock throughout the entire RPM range. Thican manage feedback from the optional dual wideband kit or even tie into existing widebands such as the AEM UEGO or Innovate for continuous protection from lean A/F conditions throughout the RPM range. Protections can be set-up to save your investment (engine) from other dire circumstances such as excessive coolant or oil temperature, low oil or fuel pressure, boost spikes, poor fuel quality, and many others. The Haltech has great features to handle overboost that are capable of cutting EVERYTHING (ignition, fuel, & boost) when you exceed your boost threshold, which can also be mapped on a 2D table. Tuning adjustments can be made on individual cylinders such as adding a few percent additional fuel to 4&6 which notoriously run hotter. Increased map resolution over the stock ECU allows the fine tuning of problem areas that cannot otherwise be reached.
With the Haltech you can sell your mass airflow sensor(s), Selin Translator, & ECU as well as other components. Z1 even offers store credit for some of these items through our core credit program. No more low speed drive-ability issues, flower pots, & idle problems. The Haltech is so user friendly that you can simply plug it in, set your injector size, and start your car.
Features:
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Diagnostic trouble code storing & Check engine light control(Access through laptop only )
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port
Factory Outputs:
• 6 x Fuel Injector outputs
• 6 x Ignition outputs
• N-VCT (Nissan Variable CAM Timing Control)
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
Factory Inputs:
• MAF sensors, Throttle Position Sensor, Oxygen sensors,
• Coolant Temperature sensor, Vehicle Speed Sensor,
• Fuel Temperature sensor, Knock Detection Sensor
Expansion I/O*:
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital Outputs
Functions:
• Dual Bank Closed Loop O2 Control
• Knock Control
• Long Term Fuel Trim
• Over Boost
• Rev Limiter
• Closed & Open Loop Boost Control
• Gear Setup
• ACF On Base Tables
• Transient Throttle Enhance
• Decel Cut
Correction Tables: Fuel Ignition Boost:
• Cranking
• Air Temp Target Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1
• Generic Correction 2
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start
Miscellaneous:
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing
Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC
Physical Dimensions:
ECU Dimensions Length: 154mm (174mm with MAP nipple)
Applications: Nissan 300ZX (Z32)
Engine Codes: VG30 , VG30DETT
Transmission: Manual only (Automatic not supported)
The Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)
Contact us for expert advice on putting the the perfect Haltech package together for your 300ZX. Our Haltech trained and certified tuners are experts in safely tuning high powered Z32s.
Z1 Motorsports: Haltech Platinum Pro PNP Package - 
