Hello and Welcome to my Z32 Part-Out thread! (**This is my my ninth update. Last update was 4/5/13 and some items have been sold since then. Sold items have been deleted!**)
Before you scroll down and browse my selection of parts, I strongly encourage you to thoroughly read the following.
As a seller, it is my job to provide you with adequate information so you can purchase my Z32 parts with confidence, and as buyers, I expect questions concerning the parts you are interested in before you send your hard earned money.
With that, I want to take this opportunity to provide you with enough information and enough guidelines to prune most of the questions before they are even asked.
*[The Big Three Rules]*
- First off, everything I have for sale is listed, with a price, and an individual picture. I have no other parts that I am interested in selling at this point in time. So . . . DO NOT ASK FOR PARTS THAT ARE NOT LISTED OR PICTURED!-Secondly, I have listed items in pairs and sets. This is to prevent having a bunch of singles of a part that would sell better as pairs. I will be more than happy to NOT sell a single and wait for that buyer who needs both. If I have a part I'm selling that isn't fully disassembled, it means I'm selling it as a whole assembly or I'm selling as a pair (e.g. Left and right fog light). So . . . I AM NOT SEPARATING OR DISASSEMBLING ANYTHING FURTHER UNLESS NOTED! -Lastly, unless listed and pictured, no extra hardware is included. Some pieces I've provided the nuts, washers, screws, or bolts for, but not everything. Take a good look at the pictures and read the description, if you don't see the installation hardware, then it's not available to you. So . . . DO NOT ASK FOR EXTRA NUTS, WASHERS, BOLTS, OR BRACKETS THAT HAVE NOT BEEN PICTURED OR LISTED! --------------------------------------------------------------------------------------------------------------------------- Now, I am going to give you some background information and stories on the Z32(s) you are buying parts off of. The majority of the parts are coming off of a 1990 300ZX NA 2+2 Automatic that was converted to a 5-Speed Manual. Said Z had 177k miles on her when the disassembling began and did have it's 120k maintenance done. The remaining parts are from a 1991 300ZX NA 2+0 Slicktop (My current garage queen) with 79k miles. The 2+2 was extremely well taken care of and won multiple awards at Branson Z Fest and Midwest Z Fest. Unfortunately, she spun a rod bearing and was stored in the garage waiting for a fix. Over time, I decided that I no longer wanted to own two Z32's, and I would keep my Slicktop and sell the 2+2 to put money towards a different toy to tinker with in 2014. Here are some pics of her at home and at shows (Note: Practically all aftermarket parts have been swapped over to my Slicktop, including wheels/tires) . . . 
At this point, you may be asking,"Why part out an immaculate Z32 over just a spun rod bearing?" Unfortunately, the resale value on Z32's has been very unforgiving and parting out could be up to 300% more lucrative than fixing her and trying to sell a nearly stock 177k NA 2+2. What this means now, is that a massive amount of high quality, clean, and fully functional parts are available to my Z brethren for purchase! I did dispose of a small pile of parts I felt were inadequate for selling, while other parts I plan to keep as back-ups for my Slicktop.
--------------------------------------------------------------------------------------------------------------------------- *[The Big Three Guidelines]* - First off, I am a husband, father, and have a full time career. So my free time is my 'Seller' time. With that, I do take pride in my ability to sell parts and interact with buyers. Your inquires will be addressed as soon as I am able, and your parts will be shipped mainly on Wed. and Fri. So Tues. and Thursday would be the ideal days to have payment made. Even if I don't get back to you the same day, I do keep track of all inquires and the time and date they were made. First inquires will be replied to first and given first opportunity to purchase, BUT I DO NOT hold items for any extended amount of time. I don't provide lay-a-way, and you are subject to missing out on parts if you don't act quickly. The first inquiry of any given part will be provided a 24 hour window (starting on the time I reply with a final price) to submit payment, or provide a money order mail date, before I acknowledge the second inquiry. - Secondly, info on my accepted forms of payment. Obviously, don't mail me cash and no personal checks. I prefer to use paypal as my sole source of payment, but I will accept mailed money orders as a secondary option. Cash will be accepted as a 'pick-up only' option. Your items will NOT be shipped till payment is received. -Lastly, info on shipping. There is a UPS by my residence and my job, so they will be my sole source of shipping, but I will comp shop FedEx for cheaper rates. All parts will be given a shipping quote on an individual basis. Shipping prices are based on the weight of the part(s) and the size of the box it gets shipped in. I am open to shipping all items, except those I have noted as *Pick-Up Only*. When inquiring about parts, you need to provide, at minimum, a Zip code or Postal code. Obviously, the more info the better. Let me note in caps for good measure . . . NOT ALL ITEMS ARE AVAILABLE FOR SHIPPING! --------------------------------------------------------------------------------------------------------------------------- Final Notes: *All items have a picture under them. There are a lot (300+), so the page may take some time to load. **If you feel that any information I have provided is incorrect or misleading, please contact me privately E-mail, or text. *** To end this post, let me be very clear . . . IF YOU ASK ANY QUESTIONS THAT WERE ANSWERED IN THIS POST, YOU WILL BE IGNORED WITHOUT REPLY! I appreciate you taking the time to read the above information and I hope it helps in making this a stress-free experience for both sides. My name is Damone and you can contact me via E-mail (dizmone@yahoo.com) or phone (816) 377-3373 (Texting is preferred; if you do call, and I miss you, please leave a detailed message.)
-----Interior, Trim, and Stripping-----
Front Dash Brace/Support $35
Steering Wheel Bearing and Signal Cancel $14 set
 Turn Signal Lever and Switch $28
 Gas Pedal Assembly (Drilled holes for [Al] pedal install) $25
 Gas Pedal Stopper $5
 Dash to Door HVAC Vents and Trim $18 pair
 Sun Visors $40 pair
 Metal ECU/Control Unit Mounting Frame $10
 Glove Box Frame $14
 Map Light Assembly $17
 Climate Control Cabin Air Temp Sensor $15
 Cruise Control Switch ('90-'91 steering wheel mounted) $15
 Headliner (T-Top 2 Seater) $75
 Headliner (T-Top 2+2) $75
Passenger Window Switch w/ Trim (Arrow is worn off) $20
 Windshield to Headliner Trim Piece $10
 Quarter Window Interior Trim Panel (2 Seater) (Left panel has a small crack) $40 pair
 Quarter Window Interior Trim Panel (2+2) (Horizontal scrapes/scratches) $30 pair
 Quarter Panel Interior Trim Pieces (Tweed and Vinyl) (Vinyl wrap is coming loose) $30 pair
 Rear Hatch Lift Side Panels (2+2) $18 pair
 Hatch to Headliner Trim Piece (2+2) (Vinyl is slightly loose) $10
 A-Pillar to T-Top Finisher Pieces $10 pair
 Sun Visor Hooks $6 pair
 Rear Hatch Carpet (Bald spots on right side) (2+2) $40
 Headlight Alignment Kit (In foam w/ cover board) (2+2) $20
 Complete Rear Seats (2+2) (Tweed) (Very good condition, aside from minor stains) $85 set *Pick-Up Only*
 Interior Side of Firewall Insulation $15
 Interior Door Handle Assembly (Minor handle fade) $30 each
 Door Latch Strikers $10 pair
 Door Pillar Close Guides $8 pair
 Door Jam Open/Close Sensor Switches $10 (complete rubber boot) $6 (torn rubber boot) $15 pair
 Rear Seats Latch Hooks $10 pair
 Hatch Cargo Cover Hooks $10 pair
 T-Top Latch Rod Guides (3 qty.) $3 each
 Floor Mat Hooks $4 each
 Rear Cargo Light (2+2) (Excellent Condition) $20
 Third Brake Light Moulding $10 pair
 A-Pillar Aluminum Moulding Brackets $10 pair
 Top, Inner Portion of Hatch Glass Moulding (2+2) $10
 Complete Hatch Perimeter Weather Stripping (2+2) $25
-----Wiring Harnesses-----
Complete Dash Harness (NA) $100
ABS Control Unit Harness (NA) $20
 Trunk/Hatch Harness $75
 Door Panel Harnesses $20 each
 Retractable Antenna Harness $10
 Ignition Light-Up Ring Wire $10
 Rear Wiper - Defrost - Third Brake Light Harness $12
-----Electronic Control Units-----
Ignition Tampering Switch $10
Jecs Resistor Pack $6
 Power Steering Control Unit $30
 Fuel Pump Control Unit $40
 Theft Warning Control Unit $15
 Power Antenna Amp $10
 Blower Motor Resistor $8
 Door/Light Reminder Chime Unit $10
 Passenger Power Lock Actuator $15
 Passive Seat Belt Control Unit $30
 Climate Control Amplifier $30
 Cruise Control Module (A.S.C.D.) $20
-----Body, Support, and Lighting----
Hood Hinges $12
 Side Mirrors (Powered/Heated) (Driver’s side SOLD!) $40
 Fuel Filler Door (2 Seater) $15
Fuel Filler Door (2+2) $15
 T-Top Hook Bar (2+2) $28
 Rear Bumper Support Foam (2+2) $20 *Pick-Up Only*
 Rear Bumper Cover (Excellent condition) (2+2) $75 *Pick-Up Only*
 Complete Rear Hatch w/ Glass (2+2) (Great shape, noticeable wear marks from where the flush spoiler was mounted) $200 *Pick-Up Only*
 Hollow Doors w/ Hinges Still Attached (Great condition) $100 each *Pick-Up Only* (Passenger Side SOLD!)
 Power Window Guide Rails (Left set and Right set) $15 set
 Door Jam Latches w/ Wiring and Linkage $30 each
 Door Hinge Support Sling (1 qty) $8
-----Suspension, Chassis, Brakes, Drivetrain-----
Front Engine Cross Member/Support Brace $70 *Pick-Up Only*
Front Hubs, Brake Dust Shields, and Suspension Knuckles (Great Condition) $120 pair
 Front King Pin / Main Swivel Control Arm $35 each
 Front Upper Control Arms (A-Arms) $20 each
 Front Upper Control Arm (A-Arm) Brackets w/ long Bolts $20 set
 Front ABS Harnesses $15 each
 Front Pillow Mount Plates $6 pair
 Brake Line Junction Box (R/F fender well) $5
 SGP Brake Booster (NA) $90
 Front Sway bar (NA) (No end links) $20
 Complete Steering Column w/ Ignition Switch and Spare Key $40
 OEM Clutch Pressure Plate (NA) $25
 Exedy Clutch Disc (NA) (Good condition, non-glazed) $20
 Automatic Engine to Transmission Plate $10
 Transmission Mount Cross Member $15
 Rear Sway Bar w/ End Links $25
 Rear Sub-Frame ('91 NA) $100 *Pick-Up Only*
 Differential Support Bracket $15
 Rear ABS Harness ('90 2+2 NA) $18
 Rear E-Brake Shoes and Hardware $30 set
 Rear Toe Rods (NA) (3 qty left) $14 each
 Rear Upper Control Arms (3 qty left) $15 each
 Rear Traction Rods (1 qty left) $10 each
 Rear Lower Control Arm Deflectors $10 pair
 Fuel Tank Exhaust Heat Shield (2+2) (Clean) $25
 Fuel Tank Support Straps (2+2) $15 pair
 Complete Fuel Tank w/ Fill Pipe and Fuel Pump (2+2 NA) $100 *Pick-Up Only*
 Fuel Filler Cap $12
-----'90-'91 NA Engine Accessories and Internals-----
NA Heads w/ Valves and Valve Springs (177k miles) $100 pair *Pick-Up Only*
Coil Pack Guides w/ Seals $20 pair
 Intake and Exhaust Cam Shafts (177k miles) $50 set
 Valve Lifters (24 qty) (177k miles) $100 set
 Cam Shaft Retaining Brackets (Missing 2) $3 each $40 set
 Oil Strainer $10
 Metal Gasket (Intake Manifold to Heads) $5
 Oil Filter Tree $20
 Idler Pulley (Lower) $10
 Rear Main Seal Retainer $8
 Exhaust Cam Gears w/ Hardware $40 pair
 Power Steering Tensioner Bracket and Block Mount $20
 Engine Fuse/Relay Cover $8
 Radiator Fan Clutch and Blade $60
 NA Pistons w/ Rings and Connecting Rods (177k miles) $25 each $140 set
 Right Side Plenum Wire Bracket $5
 Cruise Control Actuator $30
 NA Fuel Rails $20
 Thermostat Housing and Return Tube $20
 CAS Bracket $10
 Timing Belt Rear Covers and Lower Cover $20 set
 Water Pump $25
 Transmission the Block Mounting Brackets $30
 Oil Dipstick Guide Tube $5 each
 Fuel Filter Bracket $10
 Hood Alarm Switch and Mount (2 qty) (Missing rubber boot) $5 each
 Oil Pan $50
 A/C Compressor Mounting Bracket w/ Pulley $30
 Idler Pulley (Upper) $10
 Coil Packs (7 qty) $15 each
 NA Short Block w/ Crankshaft, Sprocket, and Oil Pump (177k miles) $200 *Pick-Up Only*
 PVR Air Regulator Tube (Hard pipe to IAR) $6
 Fuel Filter Hard Lines (Run down left side firewall) $10
 Valve Timing Control (V.T.C.) Solenoids (2 qty) $18 each
 A/C Condenser Fan and Housing $65
 Oil Filler Cap (2 qty) $10 each
 A/C Condenser Fan Mounting Bracket $10
 Complete NA Intake Hard Piping/Plumbing $70
 Horn Deflectors $10 pair
|
.:Massive 300ZX(Z32) Part-Out Thread w/ Pics & Prices:. - 
