Two Inline Filters are high quality Filters which do not require cleaning with solvent as do the lesser quality filters. These have a Sintered Screen Element with a Spring to avoid collapsing of the element during high oil pressure. (4) Braided Stainless -4 Lines, Teflon Sheath. 1/8"BSP to -4AN 90-degree Fitting. 12mmX1.25mm Banjo Bolt, Copper Crush Seals. Two Adel Clamps. Attention: If you have a BB turbocharger set, you will need to use the restrictor jets which we will install for an additional charge of $10 each. BB turbos require far less lubrication. Excessive lubrication will lead to premature bearing failure & excessive smoking from the exhaust. You will need to use the non-jetted version when you have non-BB turbos. Please do not jet a set of journal bearing turbos to try & prevent smoking as it will only cause more extensive damage.
FZP Ball Bearing Turbo Oil Feed Line Filter Kit?? - 
