 |
  |
|
| |
|
|
| Subject |
SELLING: Brembo Calipers/Akebono 14" Rotors BBK Conversion Brackets! |
|
| |
|
|
| Posted by |
petadakilla on November 29, 2011 at 5:08 PM |
|
| |
This message has been viewed 1166 times. |
|
| |
|
|
| |
| Screen Name: | petadakilla |
| Real Name: | Peter Kopoulos |
| Phone: | 781-864-1226 |
| Location: | Lynn, MA 01904 USA |
| E-mail: | petadakilla@yahoo.com |
Research petadakilla's post history
| |
| |
|
|
Message |
Chance to have a Brembo 14.25” BBK for around ~$600 I have been running this setup for a solid year now with ZERO issues, nothing but compliments and amazing braking power! Not sure if any of you guys have seen my thread on 300zxclub.com, but I created a BBK that is extremely cheap to piece together. SRT8 Brembo calipers can be found on eBay for ~250-350 and Z1 sells akebono rotors for $99 a piece. Consists of SRT8 Brembo calipers and Akebono 14.25" rotors, 100% pad contact and zero fitment issues.
Plus you can sell your Z32 calipers for at least $100 as the 240 crowd desires them! Here is the 3ZC threads:
[ [ [ http://www.300zxclub.com/showthread.php?t=200265 ] ] ]
[ [ [ http://www.300zxclub.com/showthread.php?t=187174 ] ] ] I am selling a set of brackets that I had custom made to allow the simple bolt on.
Buyer will receive the brackets only. No hardware or brake line fittings. The brake line fittings are easily found on amazon or ebay. Additional caliper bolts can be found at a hardware or automotive store. The additional parts you will need to source to complete the kit are as follows:
-SRT 8 front brembo calipers + pads (charger, challenger, 300c, jeep. Can be found on ebay for $200-$300)
-Akebono 14.25" rotors (got mine from Z1 @ $99 a piece)
-Edelmann brake line fitting #271300 (requires 2, 1 per side, connects hardline to srt caliper, $3 online)
-Edelmann brake line fitting #270300 (requires 2, 1 per side, connects hardline to Z32 line, $3 online)
-3/16 hard brake line that will go from SRT caliper to Z32 line, bend carefully!($5 auto store)
-Caliper bolts that will fit in through the bracket and into the SRT-8 calipers (requires 4, 2 per side, picture shown below, auto or hardware store)
-Shorter Z32 Caliper Bolt (see picture, only need 2, can shorten your current bolts or buy new ones) ***The LEFT OEM Z32 caliper bolt (under the blue cap) that goes into the spindle and then the bracket needs to either be shortened or replaced with a shorter bolt. The RIGHT OEM Z32 caliper bolt fits fine.*** 
Again, this is for the brackets only! $225 Shipped!!! Call/Text: 781 864 1226
Email: petadakilla@yahoo.com
|
|
| |
|
|
| Follow Ups |
 Brembo Calipers/Akebono 14" Rotors BBK Conversion Brackets! - petadakilla
17:08:27 11/29/11
|
|
| |
|
|
| |
|
|
| |
|
|
