Subject	SELLING: Z1 GT800R Turbo Kit! Complete with oil feed lines and more!!
Posted by	Josh@Z1 on January 20, 2011 at 5:04 PM
	This message has been viewed 474 times.
	Screen Name: Josh@Z1 Real Name: Joshua Douglas Phone: 7708387777 Location: Carrollton, GA 30116 USA E-mail: josh@300zx.com Research Josh@Z1's post history
Message	Z1 Motorsports offers the most complete turbo kits on the market for the Z32. Take a look! Z1 GT800R Turbo Kit $2895.00 Compressor Map This complete bolt on solution is based on two brand new Garrett GT2871R GT Ball Bearing turbos with all the hardware, lines, wastegates, flanges, adapters, brackets, and modifications neccessary to provide a complete bolt on application to stock exhaust manifolds. (Will also fit Mike Smith cast manifolds with little modification). No cutting, grinding, beating in frame rails, etc. Our GT800R turbo kits feature the largest trim compressor wheel available on the GT2871R and our choice of a .64 A/R turbine housing. .86 Turbine housing options are available by special request. Will flow 36psi and can produce 800+RWHP on race fuel with proper tuning and supporting modifications. These turbos feature all new components; high output compressor, high-efficiency GT series turbine and compressor wheels. Uses a 5-bolt downwpipe and comes with inlet flange adapters for a bolt-on setup to stock pipes. With the addition of camshafts, intercoolers, portwork, upgraded manifolds and our tuning abilities, these turbos are capable of producing over 800 RWHP. Kit Includes: 2 New Garrett GT BB Turbochargers 2 New High Pressure Adjustable Wastegate Actuators with Brackets (Installed) 2 Braided Stainless Steel Oil Feed Lines with .035" Restrictors & Fittings 2 Compressor Housing Inlet Adapter Flanges with O-Ringed Seals (Welded to the Compressor Housing) 2 Compressor Housing Outlet Couplers (5 Ply Reinforced Silicone) 4 T-Bolt Clamps for Compressor Outlet Couplers (225mm) 2 Exhaust Manifold to Turbine Housing Gaskets (4 Bolt) 2 Turbine Housing to Downpipe Gaskets (5 Bolt) 10 Turbine Housing to Downpipe Stainless Steel Bolts 10 Copper Crush Washers for Coolant and Oil Lines 2 Oil Return Hose Flanges with O-Ringed Seals (Installed) 4 Allen Head Fasteners for Oil Return Flanges (Installed) 2 Formed Flouro-Silicone Oil Return Hoses 6 Feet of 6.5mm (1/4") Z1 Reinforced Silicone Wastegate Actuator Hose 2 Feet of 8mm (5/16") Z1 Reinforced Silicone Coolant Hose BUY NOW!!
Follow Ups	Z1 GT800R Turbo Kit! Complete with oil feed lines and more!! - Josh@Z1 17:04:30 01/20/11