Subject	SELLING: AshSPEC High Performance Fuel System IN STOCK!
Posted by	Ash's Z on April 01, 2010 at 2:50 PM
	This message has been viewed 694 times.
	Screen Name: Ash's Z Real Name: Ash Powers Phone: 386-555-1212 Location: Edgewater, FL 32141 USA E-mail: ash@ashspecz.com Research Ash's Z's post history
Message	High Performance Fuel System Adjustable Fuel Pump Control Module, Dual Walbro Pump Bracket, + 2 Walbro 255 L/hr HP Pumps The Z32 incorporates a fuel pump control module which is controlled by the ECU to operate the fuel pump at various speeds depending on engine load. With recent advances in upgrade parts for these vehicles it is relatively easy to produce greater than 600RWHP in which case it is required to use a dual fuel pump system. When dual fuel pumps are used, the electrical load required to drive two pumps is greater than what the OE controller is capable of handling and will destroy the OE controller's power transistors. This upgraded fuel pump control module is capable of handling the electrical load twice that of a dual fuel pump setup - an "overbuild" used in this module to spread the load across multiple power transistors to ensure a long service life. Additionally, the controller has user adjustable pump duty cycles - a feature that allows the operator to dial in the output of the pumps in order to prevent regulator over-run: a condition where the fuel pressure regulator is not capable of bypassing enough fuel volume back to the fuel tank resulting in excessive fuel pressures. The controller can be used in either native twinturbo vehicles which incorporate a 3-speed control sequence or in NA-TT conversions which still employ the 2-speed control. A simple jumper allows easy configuration of this parameter. A pushbutton switch is also used to force mid-speed operation to ease the setup process. To display the fuel pump duty, a 10-segment bar LED has been incorporated into the design to simplify the setup and adjustments. A single LED is also mounted to the board and an external LED can be attached for dash-mounting to provide driver feedback. These modules are built using the OE housing and connector to make installation as simple as it can be - simply mount the new controller in the OE location and connect the body harness connector. Please visit our website for ordering at: [ http://ashspecz.com/ashspec/DualPumpController/DualFuelPump.htm ] We are offering the complete kit with twin Walbro 255 L/hr High-Pressure Pumps for $499. Controller & Bracket without pumps are $299. Please contact us via email at agpowers@bellsouth.net or feel free to call us at 386-426-5081 for more information or to place your order. We have this item in stock and ready to ship immediately.
Follow Ups	AshSPEC High Performance Fuel System IN STOCK! - Ash's Z 14:50:56 04/01/10