Subject	SELLING: AshSPEC DOOLZ Performance Dual Intakes!! >>>
Posted by	Ash's Z on December 07, 2009 at 8:00 PM
	This message has been viewed 1064 times.
	Screen Name: Ash's Z Real Name: Ash Powers Phone: 386-555-1212 Location: Edgewater, FL 32141 USA E-mail: ash@ashspecz.com Research Ash's Z's post history
Message	The DOOLZ Dual Intake has proven its functionality and benefits through only through its use on a majority of the highest horsepower TTZ's ever built, but also by its use on over a thousand individual Z32s. Its design arose from the experiences in tuning hundreds of TTZs with various intake configurations and was built as a solution to eliminate the tuning issues other previous dual intake systems presented. This dual intake system is a necessity for vehicles aiming to produce 550RWHP or higher. However, the benefits realized at lower power levels is an improvement you will feel in the seat-of-pants dynamometer. :) Many smiles to the gallon. The POP charger filters commonly used on these vehicles typically flow ~480-500CFM of airflow at a pressure drop of 1psi. Our engines at 18psi of boost pressure will draw some 850CFM which produces nearly a 4psi pressure drop through a single filter, resulting in slower spoolup response and lower power due to the fact the turbo compressor wheel must rotate faster in order to produce the same boost pressure. Twin filters can support 1000CFM at 1psi and in a dual intake setup there will be less than 1psi of pressure drop through the filter. This results in significantly improved spoolup response as well as a solid boost in power and torque production. The DOOLZ Dual Intake's design incorporates a "shared plenum" design with a common port at the junction between the two pipes. This design equally splits airflow between the two filters which results in accurate airflow metering by the mass airflow sensor. The smooth mandrel drawn tubing promotes the optimum pathway for airflow with virtually zero loss. We have these intakes in stock and are available in a variety of glossy powdercoated colors with a very durable finish. We have them available in white, pearl white, red, black, silver, and in a PC Chrome finish. Kits are provided with all 4 silicone couplers available in black, blue, or red. Also included is a dummy MAS unit for mounting of the second filter as well as all new stainless steel hoseclamps. Please see our website for more pictures, additional information, and online ordering. We also have POP charger intakes available as purchasing options. Kit Cost: $225 Pop Chargers available for $90 each. This product will require an ECU reflash. We are currently offering this reflash free to our ECU customers with purchase of this product. Please contact us for special pricing if you do not have an AshSPEC ECU. [ http://ashspecz.com/ashspec/doolz/doolz.htm ]
Follow Ups	AshSPEC DOOLZ Performance Dual Intakes!! >>> - Ash's Z 20:00:38 12/07/09