Subject	SELLING: EP Racing Built Short Block (DRAG ONLY)
Posted by	Tech@EPR on October 05, 2009 at 7:49 PM
	This message has been viewed 361 times.
	Screen Name: Tech@EPR Real Name: M Wilson Phone: 609-234-4700 Location: Ft. Worth, TX 76009 USA E-mail: tech@epracing.net Research Tech@EPR's post history
Message	THIS SHORT BLOCK IS FOR DRAG RACING ONLY. IT WAS NOT BUILT WITH STREET DRIVING OR DAILY DRIVING HABITS IN MIND. THIS SHORT BLOCK IS NOT WELL SUITED FOR ROAD COURSE APPLICATIONS. THIS SHORT BLOCK IS FOR DRAG RACING ONLY THIS SHORT BLOCK WAS BUILT BACK IN JUNE OF THIS YEAR. THE POWER THIS ENGINE IS CAPABLE OF HANDING IS 850+HP. THERE ARE A LOT OF DETAILS ABOUT THIS BLOCK THAT ARE DESIGNED TO AID IN COOLING FOR A DEDICATED DRAG RACING ENGINE. THE MODIFICATIONS DONE TO THIS BLOCK ARE AS FOLLOWS. BLOCK VATTED COMPRESSION MILLED DECK MAIN HOUSING BORES FOR BOTH MAINS & RODS WERE DONE BALANCED CRANKSHAFT POLISHED CRANKSHAFT PIN FITTED PIN BORES ON PISTONS PINN FITTED PIN BORES ON RODS POLISHED WRIST PINS FILED RINGS (RING PACKAGE INSTALLED WAS NITRIDE STEEL TOP AND NAPIER SECOND. STANDARD TENSION OIL RINGS) RINGS WERE GAPPED TO MY SPECIFICATIONS CLEVITE MAIN & ROD BEARINGS BLOCK FILLED WITH CRETE ALL NEW GASKETS/SEALS INSTALLED NEW OIL RESTRICTORS INSTALLED ALL PARTS WERE 3 CYCLE STAGED CLEANED WISECO 88MM PISTONS W/ SWAIN COATING EAGLE H-BEAM CONNECTING RODS W/ ARP 2000 ROD BOLTS NEW OIL PICK UP TUBE NEW OIL PICKUP TUBE GASKET REBUILT OEM OIL PUMP OIL CLEARANCES WERE SET TO MY SPECIFICATIONS FOR BOTH MAINS & RODS ENGINE WAS ASSEMBLED WITH ENGINE OIL INCLUDED WITH THIS ENGINE WILL BE A WINDAGE CRANKSCRAPER KIT THAT THE CUSTOMER PURCHASED AFTER THE ENGINE WAS ASSEMBLED. YOU WILL HAVE TO INSTALL THAT YOURSELF OR YOU CAN REQUEST TO HAVE THAT ITEM INSTALLED FOR AN ADDITION $100. THIS BLOCK IS FULLY PREPPED AND READY TO GO. A WELL PORTED SET OF CYLINDER HEADS AND A MATCHED PAIR OF CAMSHAFTS WILL RUN GREAT ON THIS ENGINE. THE SHORT BLOCK COMES WITH A FULL ENGINE GASKET KIT. BLOCK HAS THE OIL PUMP AND OIL PAN ON WITH THE REAR COVER AND REAR MAIN SEAL INSTALLED. A BUILD BOOK IS INCLUDED WITH THIS PURCHASE. ALL DOCUMENTS AND RECEIPTS COME WITH THIS PURCHASE. THIS ENGINE HAS A 1 YEAR WARRANTY ON THE ASSEMBLY. IF YOU HAVE ANY QUESTIONS PERTAINING TO THIS SALE PLEASE FEEL FREE TO CONTACT ME. AGAIN THIS BLOCK IS SOLELY INTENDED FOR DRAG RACING ONLY. DUE TO THE NATURE OF THE COOLANT SYSTEM BEING FILLED WITH CRETE THIS BLOCK IS ONLY GOOD FOR DRAG PURPOSES. ASKING PRICE IS $2200+SHIPPING. SHIPPING FOR A SHORT BLOCK TYPICALLY RUNS $180-225.
Follow Ups	EP Racing Built Short Block (DRAG ONLY) - Tech@EPR 19:49:34 10/05/09