TwinTurbo.NET: Nissan 300ZX forum - Z1 Fuel Pressure Gauge/Nitrous Adapter New Product In Stock
People Seeking Info
 
   


     
Subject SELLING: Z1 Fuel Pressure Gauge/Nitrous Adapter New Product In Stock
     
Posted by bryan@Z1 on August 04, 2008 at 10:27 AM
  This message has been viewed 422 times.
     
 
Screen Name:bryan@Z1
Real Name:bryan Crawford
Phone:770-838-7777
Location:Carrollton, GA 30116 USA
E-mail:bryan@300zx.com
Research bryan@Z1's post history
 
     
Message Fuel Pressure Gauge / Nitrous Adapter


Fuel pressure and nitrous gauge in-line adapter developed for the needs of Z owners.

This unique piece includes (3) threaded ports available to tap a variety of accessories into your fuel supply. The two ports plugged with black pipe plugs are threaded with 1/8" NPT (27/in), which are the proper size in order to screw in many fuel pressure gauge sending units including Autometer products and others likely produced by American companies. These 1/8 NPT ports are also the correct pitch to screw in the included fitting with most Nitrous Oxide wet kits in order to run the fuel supply line to the fuel solenoid. Most small fluid filled engine bay gauges will also screw into the 1/8 NPT ports. The remaining third port is labeled with "28" and plugged with a brass plug. This port is threaded for 1/8 BSPT (28/in) devices like the sending units for most Japanese fuel pressure gauges including Defi, Greddy, HKS, Apex-i.

The inlet and outlet of this adapter are the perfect size to fit the OEM 5/16" fuel lines, while the internal size still stays the same as the OE supply hard-lines, resulting in no additional restriction on your fuel supply system.

Includes:

(1) CNC billet aluminum adapter
(2) 1/8 NPT (27/in) pipe plugs
(1) 1/8 BSPT (28/in) pipe plug
(2) hose clamps
Installation: Relieve the fuel pressure on your fuel system. Make sure your installing in the supply side as opposed to the return. Then while wearing eye protection with a rag in hand, simply cut your fuel line in the location of your choice. Slide the supplied clamps on the rubber hose, then install the adapter and tighten the clamps. When installing accessories in the ports we suggest using a liquid teflon sealant on the threads.



$24.00

     
Follow Ups
  • Z1 Fuel Pressure Gauge/Nitrous Adapter New Product In Stock - bryan@Z1 10:27:51 08/04/08