 |
  |
|
| |
|
|
| Subject |
SELLING: 12.2" big brake kit from MATTZ Garage.. |
|
| |
|
|
| Posted by |
TURBOGAGE(MATTZ Garage) on July 23, 2007 at 12:18 PM |
|
| |
This message has been viewed 298 times. |
|
| |
|
|
| |
| Screen Name: | Matt P. |
| Real Name: | Matt Pool |
| Phone: | 916-804-5688 |
| Location: | Forney, TX 75126 USA |
| E-mail: | matt@winfactory.us |
Research Matt P.'s post history
| |
| |
|
|
Message |
Here it is... finally... 12.2" big brake kit that is a direct bolt on - no spacers and no longer studs needed! It's actually designed to push the rotor and caliper further into the wheel well by 2.5mm giving you more clearance. 12.5lbs total weight - over 6lbs lighter than stock (currently only for the 30mm calipers) As I tell people who test drive my car and my buddy Josh Hawkins - who is the first to have the production kit on his car, "..only use about half the braking pressure you would normally use... otherwise, it will stop very hard and throw you forward." The only "modding" needed is to bend back the dust plate and for the early models, the bottom-front part of the dust plate will need to be removed. As you can see from the pictures, the cooling vanes are insane compared to stock, brembo, or the 350Z rotors and with the added weight savings, these are the best bang for your buck big brakes I have come across... I know.. "of course they are... there your kit.." hehe Here's the best part.... new Rotors are less than $50 a piece!! The kit includes: 2 - rotors (1 left and 1 right)
2 - aluminum hats
2 - relocation brackets (1 left and 1 right)
4 - mounting bolts, nuts and washers $650 + shipping ... allow 7-10 days to setup and ship.. as each kits will be assembled and checked as orders are placed.
If you have any questions, feel free to email me or give me a call (916) 804-5688.
|
|
| |
|
|
| Follow Ups |
|
|
| |
|
|
| |
|
|
| |
|
|
12.2" big brake kit from MATTZ Garage.. - 
