Subject	SELLING: Single 8" fiberglass sub enclosure
Posted by	black300zx on July 12, 2007 at 11:32 PM
	This message has been viewed 101 times.
	Screen Name: black300zx Real Name: Don Wood Phone: 610-513-8324 Location: Elkton, MD 21921 USA E-mail: Daw422@gmail.com Research black300zx's post history
Message	I made this last summer, but never finished or used it. It's getting in the way; I want it gone. It's very solid, and the mounting ring is flush mounted and about an inch thick where the sub mounts. I can get the actual dimensions of the recess and cutout upon request, and I'll also measure the internal volume if desired. Wrapped in black or tan vinyl, it would look very nice. This will only fit a 2+2. To make it ready for paint or carpet, you just need to sand off the raised lettering and add a little bondo to fill in the low spots that will be left. The writing that you see (school of hard knocks) is a raised rubbery lettering, and the resin didn't soak through it, so when you sand it off, it'll get removed down to the base (wood or fiberglass, depending on the area). The result will be a recess where the letters were that is about the thickness of a cotton t-shirt. A dab of bondo and a bit of sanding and it'll be filled in. $125 + shipping
Follow Ups	Single 8" fiberglass sub enclosure - black300zx 23:32:05 07/12/07